Menu

1996 Sabre 362

  • 36 ft
  • Racer and Cruiser
  • San Diego, CA, US

Yacht price :

$138,500

Overview

New Listing: Turnkey 1996 Sabre 362 w/ Deep Draft Keel 

SHOWS LIKE NEW, SHE IS STUNNING

The Sabre 362 is a luxurious blue water cruiser with performance capabilities that put this yacht at the speedier end of the blue water category. Jim Taylor did very well with this design, and the Sabre Design Team's impressive interior and deck design make the 362 a real winner.

This Sabre 362 is ready to perform: She boasts a deep draft keel - essential for West Coast waters.  

Boats like this do not get seen on the market very often. She is in excellent condition, and has recently been detailed including all brightwork. 

Highlights include:

This was the Annapolis Boat Show display boat for Sabre Yachts

Awlgrip Green Hull with beautiful varnished teak cap and hand rails

  

Specifications

Basic Information

Manufacturer:
Sabre
Model:
362
Year:
1996
Category:
Sail
Condition:
Used
Location:
San Diego, CA, US
Available for sale in U.S. waters:
Yes
Vessel Name:
Boat Type:
Racer and Cruiser
Hull Material:
Fiberglass
Hull Type:
Hull Color:
HIN:
Designer:
Jim Taylor and the Sabre Design Team
Flag of Registry:

Dimensions & Weight

Length:
36 ft - 10.97 meter
LOA:
36 ft 2 in - 11.02 meter
Beam:
12 ft - 3.66 meter
Draft - max:
6 ft 6 in - 1.98 meter
Bridge Clearance:
53 ft 2 in - 16.21 meter
Dry Weight:
-

Engine

Make:
Model:
Engine(s):
1
Hours:
-
Cruise Speed:
-
Range:
-
Joystick Control:
No
Engine Type:
Inboard
Drive Type:
Direct Drive
Fuel Type:
Diesel
Horsepower:
-
Max Speed:
-

Tank Capacities

Fuel Tank:
34 gallons - 1 tank(s)
Fresh Water Tank:
78 gallons - 1 tank(s)
Holding Tank:
30 gallons - 1 tank(s)

Accommodations

Total Cabins:
3
Total Berths:
3
Total Sleeps:
-
Total Heads:
1
Captains Cabin:
No
Crew Cabins:
-
Crew Berths:
-
Crew Sleeps:
-
Crew Heads:
-

Gallery

Descriptions

ACCOMMODATIONS

Few sailing yachts are built to as high a level of fit and finish as the SABRE 362. Woodworking details, rarely found in even high priced custom yachts, abound in her luxurious interior. Dovetailed drawer oxes, louvered cabinet doors, and beautifully sculpted laminated trims demonstrate SABRE's skills and commitment to quality craftsmanship.

To port is an aft facing chart table at the end of a 6' 4" long settee. Ample space is provided for today's sophisticated navigational electronics. To starboard is an L-shaped settee with a fold up bulkhead mounted table. When open the leaf reaches to the port settee creating a large table for all the crew and guests. With the table folded up onto the bulkhead the salon becomes an exceptionally large and comfortable space in which to socialize or relax with a good book. The starboard side settee has a filler board enabling one to convert settee into a double berth

The starboard-side galley is well designed for an active cruising family. A double stainless steel sink with single lever mixing faucet is situated close to the centerline so that it remains usable while underway. A deep and well insulated icebox, cooled by SeaFrost refrigeration, is found outboard of the sinks and features a front opening door in addition to the two top opening lids. There is ample room for your stores outboard of and above the counter. A propane stove and oven with stainless steel safety bar is located at the aft corner of the galley space.

The owner's stateroom is forward and features a large V-berth, and a vanity sink in addition to a wood-framed mirror and seat. To port is a large cedar-lined hanging locker. A large deck hatch and two opening ports provide light and air to this comfortable space.

The private aft cabin provides a comfortable space beneath the yacht's cockpit cabin sole. Storage spaces are found here for all of the gear that you and your crew have brought along. A cedar-lined hanging locker is another reminder of the quality of this yacht's fit and finish.

The SABRE 362 offers a spacious head compartment with separate stall shower. This is a one piece fiberglass unit that is both practical and easy to maintain. A bi-fold door separates the shower from the head compartment. A large hanging locker is outboard of the shower stall. The vanity is located next to the head and there is a large locker with sliding doors outboard of these.



ENGINE

Engine Make: Westerbeke
Engine Model: 35B-10 3 Cyclinder
HP: 32  at 3600rpm
Hours: 847

Drive: Direct Drive shaft with Dripless Seal
Prop: Autoprop 3 blade (Feathering  - See online for complete details)
Maximizes thrust at all ranges of rpm / be it forward or reverse

RECENT SERVICE:
Clean Heat exchanger, serviced exhaust elbow , replace filters, belts,hoses & Impeller touch up paint



ELECTRONICS
  • Raytheon GPS/Chartplotter Pathfinder RL70C Color at helm
  • Raytheon (18") Radar Dome on SS pole aft port side
  • Raytheon ST6002 autopilot control
  • B&G Analog Wind speed
  • B&G Analog Wind direction
  • B&G Analog depth
  • B&G Analog boat speed ( not functioning at this time )
  • Icom VHF radio at Nav
  • Eclipse Stereo  am/fm/cd
  • 2 Cockpit speakers 2 main saloon speakers


ELECTRICAL
  • Freedom model 10 inverter 12 v 100amp /  3 stage charger 50 amp
  • (1) group 31 110 amp deep cycle engine battery
  • (2) 8d 250 amp deep cycle house batteries
  • 110V Shore power w/GFCI and 30 amp cord
  • AC/DC breaker panel
  • 12v fans 1 in each cabin (3) 
  • 12v brass reading lights
  • 12v plug at Nav table
  • 2 115v outlets  galley and Nav table 
  • Propane fume detector Fireboy S2-A
  • SEAFROST refrigeration
  • DC Battery selector switch (1/2/all/lock)
  • Manual / auto bilge pump
  • Electric windlass


MECHANICAL & PLUMBING
  • Adler/Barbour Refrigerator (top and front loading)
  • 2 burner propane cooktop w/oven
  • 2 tank propane locker aft laz in cockpit
  • Vacu-flush head w/macerator pump 
  • SS sink with pressure water and manual pump salt and fresh water
  • Sink in froward berth
  • Shower in cockpit
  • 2 water tanks (port side main saloon & under forward berth) 
  • Groco bronze thru hull fittings


RIG, SAILS & DECK HARDWARE
  • Hall Spars mast and boom (repainted 2011) Standing rigging inspected at this time and all ok
  • Hall Spars C-24 Quik Vang
  • Furlex headsail roller furling
  • 2011 Quantum Mainsail
  • 1997 Asymmetric Spinnaker w/ATN snuffer sock (used 3 times excellent condition)
  • 2002 Quantum 150% Genoa on boat now (new UV cover 2011)
  • Original 120% Jib 1996 not on boat  used condition, not recently inspected
  • Standing Rigging (wire rigging) inspected when mast pulled to be painted 2011
  • Sailtec Hydraulic Backstay
  • 2 SS selftailing Lewmar 30s on cabin top
  • 2 SS selftailing Lewmar 48s on cockpit coaming (primary's)
  • Line jammer port and starboard side of companionway
  • NEW jib sheets and reef lines


BOTTOM PAINT

Last Bottom done 2013  (also done in 2005, 2009) done at Driscoll Boat Yard

Pettit B-94 the protector  (Black)

Proline (Y3062) spot primer as required  (Grey)



PORTS & DECK HATCHES

Forward berth:
• 1 large overhead hatch
• 2 SS opening ports

Main Saloon:
• 1 large overhead hatch
• 1 small overhead hatch
• 2 SS opening ports
• 2 fixed window panels 

Head:
• 1 small overhead hatch
• 2 opening ports

Aft Berth:
• 3 opening ports



Manufacturer Provided Description

Easily managed by two, the Sabre 362 is designed for high-performance luxury cruising. The hull design is a blend of Sabre's performance design concepts, proven in transatlantic passages and offshore racing, together with the latest developments in yacht design technology. Her powerful sail plan gives excellent light-air speed. On deck the Sabre 362 features a new generation of styling harmony which evolved from the detailing of the Sabre 38 and Sabre 425. Her cockpit incorporates advanced ergonomics for comfort on extended passages. Self-tailing genoa winches are located close to the helm for convenience and ease of sailing. Every Sabre incorporates the best hardware: Edson, Hall Spars, Harken, Lewmar and Westerbeke to name a few. The Sabre 362, like all Sabre hulls and decks, is built to withstand the rigors of the sea. Safety and structural integrity are put first in the construction by alternating layers of hand laminated fiberglass mat and knitted roving. Balsa core is used as a stiffener in areas of high stress. Hull durability is increased by incorporating vinylester resin and ISO NPG gelcoat into the DuraLam protection system. Belowdecks, the generous beam of the Sabre 362 gives her a very spacious and open plan. Her forward stateroom is especially large with a full-width double berth and a convenient vanity sink unit. The main salon has a full width table that folds against the bulkhead when not in use. The chart table has ample lockers for recessed navigational instruments. There is exceptional storage in her L-shaped galley in the many drawers and lockers. The molded fiberglass head features a contemporary island sink, a separate shower stall, and a wet locker for foul weather gear. Her finely hand-crafted and varnished joinery gleams in either teak or cherry.

PHRF Handicap (Average): 111



Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Links

External Links

location:

Presented by :

Kenyon Martin

View Profile
74 Listing(s)

Our Locations :

Featured Yacht :

Disclaimer: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his/her agents, or his/her surveyors, to instigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.(5820517)
Top